SR-M1 3.5mm Lavalier with 4.1 (1.25m) Cable for Wireless Systems, Portable Recorders, Cameras, Blink 500 Systems and more

SR-M1 3.5mm Lavalier with 4.1 (1.25m) Cable for Wireless Systems, Portable Recorders, Cameras, Blink 500 Systems and more

+ -

$ 30.00
  • Item no: SR-M1
  • Availability:
The Saramonic SR-M1 lavalier is a 3.5mm plug-in powered lavalier microphone with a 4.1’ (1.25m) cable. Designed as replacement lavaliers for the Saramonic Blink 500 and Blink 500 Pro wireless systems.
 It also works perfectly with wireless transmitters, handheld recorders, as well as DSLR, mirrorless and video cameras.

A must-have for handheld recorders
The SR-M1 makes it easy to add a lavalier to your handheld recorder and there are so many ways you can use it and expand your recorders capabilities. Just plug it into the 3.5mm mic input on to your recorder and start recording. Drop the recorder in a
 pocket or place it in on a podium or table to capture speeches, interviews and events. Slide it into a groom’s pocket at a wedding to capture the ceremony. There are so many uses that make the SR-M1 lavalier an invaluable tool for your handheld recorder.

Ideal solution for wireless systems
Replace a lost or damaged lavalier, or just have a back-up on hand for your wireless system at less than 1/4 of the cost of the original replacement lav. You can even add a lavalier to that another brand’s 2.4GHz micro wireless system that doesn’t come
 with one, for less than half the price of their branded lav. It’s a great way to Go.

Simple lavalier solution for handheld video

The SR-M1 also makes a great vlogging and handheld video commentary microphone. Just plug  it into your DLSL, Mirrorless or Video camera, and you have an extremely cost-effective lavalier microphone that gives you just the right amount of cable length
 for handheld filming. Easy to pull out and plug in whenever inspiration strikes, or when you just want to capture the moment.

Replacement for Blink 500 and Blink 500 Pro Wireless Systems

The SR-M1 is the same lavalier microphone that is included with the Blink 500 and Blink 500 Pro wireless systems. Making it the prefect choice to replace lost or damaged lavaliers from those systems.

Acoustic Principle: Electret Condenser
Polar Pattern: Omnidirectional
Connector: 3.5mm
Cable Length: 4.1’ (1.25m)
Maximum SPL: 110dB
Sensitivity: -39dB+/-2dB(0dB=1V/Pa,1kHz)
Signal-to-Noise Ratio: ≥60dB
THD: <1% (94dB SPL at 1kHz)
Power Requirements: Plug-in-Power (1V~10V)
Standard Operating Voltage: 3V
Current Consumption: <500μA
Output Impedance: <2.2KΩ

Compatible Wireless Transmitters and Recorders:
Saramonic: UwMic Series TX9/TX15/TX10, Blink 500 Pro TX, Blink 500 TX, VmicLink TX, SR-Q2, SR-Q2M
Sennheiser: Evolution Series G1/G2/G3/G4, XSW-D, SK AVX, SKD1, SK1093, SK20
Rode: Wireless Go, RODELink TX-Belt, TX-XLR,
Tascam: DR-05, DR-05 mkII, DR-05X, DR-07, DR-07 mkII, DR-07X, DR-10L, DR-10C
Zoom: F1-LP, F1-SP, H1, H1n, H2, H2n, H4, H4n, H4n Pro, H5, H6, XYH-6
Azden: 35BT, 15BT
Nady: UB10, UB16, WLT14, and WLT15
Senal: AWS-2000
Boya: TX8, TX8 Pro, WFM12
Roland: R-05, R-07
Sony: PMC-A10, PMC-D10, PMC-D50, PMC-D100, PMC-D1
Marantz: PMD620
and many more

1 x SR-M1 Lavalier with 3.5mm Output
1 x Foam Windscreen
1 x Alligator-Style Mic Clip