SmartRig DI Professional Lightning Audio Interface with XLR & 1/4" Inputs for iPhone & iPad

SmartRig DI Professional Lightning Audio Interface with XLR & 1/4" Inputs for iPhone & iPad

+ -

$ 119.00
  • Item no: SMARTRIGDI
  • Availability:
The Saramonic SmartRig Di is a compact audio interface that enables you to connect a professional microphone, guitar or instrument to any Apple iPhone or iPad with Lightning. There’s an incredible number of amazing music-making apps that turn your device into a pocket-sized recording studio, and the SmartRig Di lets you use them to their full potential. You can also plug in a professional shotgun mic, wireless lavalier or any mic to vastly improve the sound quality of the videos you shoot. Content creators, journalists and podcasters can use the SmartRig Di to make excellent sounding recordings anywhere they happen to be.

A built-in high-quality mic preamp gives you all the power you need to get great sound, and you can dial in the perfect level with its nicely sized gain knob. Condenser mics can be supplied with +48 volts of phantom power, which makes it possible to use almost any kind of mic. A 3.5mm headphone output on the SmartRig Di lets you hear your music apps in real-time, and to listen to the playback of your videos (app dependent). You just plug it into the Lightning port to your iPhone or iPad, turn on the power switch, and launch the apps of your choice. Connect any kind of guitar or mic and let your creativity run wild.

The combo input on the SmartRig Di allows you to plug in either 3-pin XLR or 1/4” (6.35mm) connectors. The 1/4” input is impedance-matched to provide the best sound quality for electric guitars, basses, and acoustic instruments with pickups. Whether you’re laying down a track on a new song, recording a podcast episode in the field, or shooting a viral video for YouTube. The SmartRig Di is an affordable and ultra-portable device with impeccable sound quality that provides an impressive amount of functionality to a wide range of uses.

Powered by one 9V battery, the SmartRig Di does not use your portable device’s power. Giving you more time to create and perform.  The SmartRig Di features a 1/4”-20 thread on the back of the device for nearly limitless rigging options and the Included strap make it easy to attach to a selfie stick, tripod or mic stand.

Frequency Response: 20Hz to 20kHz, +/-0.5dB
Distortion: Less than 0.01% @ 1kHz, -30dBu input
Signal to Noise Ratio: 80dB @ 1kHz, -30dBu input
Noise: -98dB full band (with Phantom Power)
Gain: +23dBu
Maximum Output Level: 2Vrms
Phantom Power: 48V
Phantom Max Current: 13mA
Channels: 1
Inputs: 1 x XLR + 1/4" (6.35mm) Combo Jack
Outputs: 1x Male USB-C Output Cable and 1 x Female 1.8” (3.5 mm) Headphone Jack
Battery: 1 x 9-volt (Alkaline or Lithium)
Dimensions: 3.65" x 1.61" x 1.65" (88 x 41 x 42mm)
Weight: 2.65 oz (75g)

 

1 x SmartRig DI
1 x Hook and Loop Cable Tie and Mounting Strap
1 x Printed Manual
1 x Warranty Card