CaMixer On-Camera Audio Adapter and Mixer with Dual Microphones and XLR with +48V Phantom Power Preamp, Headphone Output and Shoe Mount for DSLR, Mirrorless and Video Cameras

  • A complete solution for improving sound on DSLR, mirrorless, and camcorders
  • Includes a mixer, mics, output and input cables, and camera mount
  • Provides +48 volts of phantom power to professional XLR mics
  • Monitor audio during recording and playback with built-in headphone jack
  • Durable metal construction with shoe mount for microphones, lights or other equipment

The built-in microphones on DSLR, mirrorless, cinema and video cameras sound terrible, but if you use the Saramonic CaMixerwith your camera, your audio will be elevated to broadcast quality. The CaMixer supplies you with two excellent-sounding condenser microphones, and you can also use the XLR microphone of your choice. A built-in headphone jack lets you listen to everything you shoot, and the entire package is compact and ultraportable.

The lightweight CaMixer runs on a single 9-volt battery and comes with two low-profile condenser microphones that plug directly into it. These mics can swivel up and down and rotate to point at people and other sound sources. A mini-XLR input on the side makes it possible to connect professional microphones, and a switch applies +48 volts of phantom power for using shotgun condensers and other kinds of microphones.

A large, stepped gain knob lets you easily dial-in perfect levels, and the backlit display lets you see your audio and battery meters. You can switch between recording and playback modes to listen to your videos through the CaMixer’s headphone jack. A shoe mount is provided at the top to attach microphones, lights or other equipment, and a tripod thread at the base enables you to mount to a camera.

Included items:

1 x CaMixer audio interface

2 x Swiveling condenser microphones

2 x Output cables (1 for cameras with headphone jacks, 1 for cameras without headphone jacks)

1 x Metal shoe mount

1 x Short mini-XLR to regular XLR cable

1 x Printed manual

1 x Warranty card 

Specifications:

Frequency Response: 20 Hz to 20 Khz, +/-0.5 dB

Signal to Noise Ratio: 82 dB @ 1 kHz, -30 dBu input

Distortion: Less than 0.03% @ 1 kHz, -30 dBu input

Input 1 Gain: 15 dB

Input 2 and Mini XLR Jack Gain: 15 dB

Microphone Inputs 1 & 2 Power: +5V Microphone Power

XLR Mini Input Power: +48V Phantom Power (On/Off)

VU Meter: -18 dB to +3 dB in 3 dB increments

Power Requirements: 9V alkaline or lithium battery

Dimensions: 3.7 x 2.5 x 1.4" (95 x 35 x 65 mm)

Weight: 5.5 oz (156g)

Optional Accessories (Sold Separately):

  • XM1-WS Furry Windjammer for SmartMic and SR-XM-1
  • SR-LV600 Mini-XLR Omnidirectional Lavalier Microphone for SmartMixer & CaMixer (20' Cable)
  • SR-HM7 Cardioid Dynamic Handheld Interview Microphone
  • SR-TM1 Cardioid 11” Cardioid Shotgun Microphone
  • SR-TM7 Super-Cardioid 15” Cardioid Shotgun Microphone
  • SR-NV5 Cardioid 6.5” Shotgun Microphone
  • XLavMic-O Omnidirectional Lavalier with XLR Connector
  • XLavMic-C Cardioid Lavalier with XLR Connector
  • UwMic9 RX9+TX9+TX9 Dual UHF Wireless Lavalier Microphone
  • UwMic9 RX9+TX9 UHF Wireless Lavalier Mic System
  • UwMic9 RX9+HU9 UHF Wireless Handheld Microphone System
  • VmicLink5 RX+TX+TX+TX Three-Channel 5.8GHz Wireless Lavalier System
  • VmicLink5 HiFi RX5+TX5 5.8GHz Wireless Lavalier System
  • WM4C-C35 Replacement 3.5mm Male Stereo TRS to 3.5mm Male Stereo TRS Output Connector Cable
  • SR-CS350 2-Pack 3.5mm Male Stereo TRS to 3.5mm Male Stereo TRS Output Connector Cable
  • LC-C35 Output Cable: Locking 1/8” to Lightning cable for iPhone & iPad
  • UTC-C35 Output Cable: Locking 1/8” to USB Type-C cable for smartphone or tablets
  • SR-PMC2 Output Cable: 1/8” to TTRS cable for Smartphone or Tablets
  • SR-GMC2 Output Cable: 1/8” to select GoPro cameras
  • USB-C201 Output Cable: Locking 1/8” to USB cable PC or Mac computers
  • SR-UC-201 3.5mm Female TRS Microphone Adapter Cable to 3.5mm Male TRRS for smartphone or tablets
  • SR-25C35 3.5mm to 2.5mm Microphone Output Cable for SSE with Fuji Cameras
  • SR-XM1 Replacement Microphone for SmartMixer and CaMixer
    " data-bread-crumbs="">
    $ 129.00
    -
    +
    find a dealer

    Add to wishlist
    • A complete solution for improving sound on DSLR, mirrorless, and camcorders
    • Includes a mixer, mics, output and input cables, and camera mount
    • Provides +48 volts of phantom power to professional XLR mics
    • Monitor audio during recording and playback with built-in headphone jack
    • Durable metal construction with shoe mount for microphones, lights or other equipment

    The built-in microphones on DSLR, mirrorless, cinema and video cameras sound terrible, but if you use the Saramonic CaMixerwith your camera, your audio will be elevated to broadcast quality. The CaMixer supplies you with two excellent-sounding condenser microphones, and you can also use the XLR microphone of your choice. A built-in headphone jack lets you listen to everything you shoot, and the entire package is compact and ultraportable.

    The lightweight CaMixer runs on a single 9-volt battery and comes with two low-profile condenser microphones that plug directly into it. These mics can swivel up and down and rotate to point at people and other sound sources. A mini-XLR input on the side makes it possible to connect professional microphones, and a switch applies +48 volts of phantom power for using shotgun condensers and other kinds of microphones.

    A large, stepped gain knob lets you easily dial-in perfect levels, and the backlit display lets you see your audio and battery meters. You can switch between recording and playback modes to listen to your videos through the CaMixer’s headphone jack. A shoe mount is provided at the top to attach microphones, lights or other equipment, and a tripod thread at the base enables you to mount to a camera.

    Included items:

    1 x CaMixer audio interface

    2 x Swiveling condenser microphones

    2 x Output cables (1 for cameras with headphone jacks, 1 for cameras without headphone jacks)

    1 x Metal shoe mount

    1 x Short mini-XLR to regular XLR cable

    1 x Printed manual

    1 x Warranty card 

    Specifications:

    Frequency Response: 20 Hz to 20 Khz, +/-0.5 dB

    Signal to Noise Ratio: 82 dB @ 1 kHz, -30 dBu input

    Distortion: Less than 0.03% @ 1 kHz, -30 dBu input

    Input 1 Gain: 15 dB

    Input 2 and Mini XLR Jack Gain: 15 dB

    Microphone Inputs 1 & 2 Power: +5V Microphone Power

    XLR Mini Input Power: +48V Phantom Power (On/Off)

    VU Meter: -18 dB to +3 dB in 3 dB increments

    Power Requirements: 9V alkaline or lithium battery

    Dimensions: 3.7 x 2.5 x 1.4" (95 x 35 x 65 mm)

    Weight: 5.5 oz (156g)

    Optional Accessories (Sold Separately):

    • XM1-WS Furry Windjammer for SmartMic and SR-XM-1
    • SR-LV600 Mini-XLR Omnidirectional Lavalier Microphone for SmartMixer & CaMixer (20' Cable)
    • SR-HM7 Cardioid Dynamic Handheld Interview Microphone
    • SR-TM1 Cardioid 11” Cardioid Shotgun Microphone
    • SR-TM7 Super-Cardioid 15” Cardioid Shotgun Microphone
    • SR-NV5 Cardioid 6.5” Shotgun Microphone
    • XLavMic-O Omnidirectional Lavalier with XLR Connector
    • XLavMic-C Cardioid Lavalier with XLR Connector
    • UwMic9 RX9+TX9+TX9 Dual UHF Wireless Lavalier Microphone
    • UwMic9 RX9+TX9 UHF Wireless Lavalier Mic System
    • UwMic9 RX9+HU9 UHF Wireless Handheld Microphone System
    • VmicLink5 RX+TX+TX+TX Three-Channel 5.8GHz Wireless Lavalier System
    • VmicLink5 HiFi RX5+TX5 5.8GHz Wireless Lavalier System
    • WM4C-C35 Replacement 3.5mm Male Stereo TRS to 3.5mm Male Stereo TRS Output Connector Cable
    • SR-CS350 2-Pack 3.5mm Male Stereo TRS to 3.5mm Male Stereo TRS Output Connector Cable
    • LC-C35 Output Cable: Locking 1/8” to Lightning cable for iPhone & iPad
    • UTC-C35 Output Cable: Locking 1/8” to USB Type-C cable for smartphone or tablets
    • SR-PMC2 Output Cable: 1/8” to TTRS cable for Smartphone or Tablets
    • SR-GMC2 Output Cable: 1/8” to select GoPro cameras
    • USB-C201 Output Cable: Locking 1/8” to USB cable PC or Mac computers
    • SR-UC-201 3.5mm Female TRS Microphone Adapter Cable to 3.5mm Male TRRS for smartphone or tablets
    • SR-25C35 3.5mm to 2.5mm Microphone Output Cable for SSE with Fuji Cameras
    • SR-XM1 Replacement Microphone for SmartMixer and CaMixer

    Shipping

    Orders are processed and shipped from our office in California, Monday - Friday, 8am - 5pm.

    Return Policy

    Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange. To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging. To complete your return, we require a receipt or proof of purchase.

    There are certain situations where only partial refunds are granted:
    -Items with obvious signs of use
    -Any item not in its original condition, is damaged or missing parts for reasons not due to our error
    -Any item that is returned more than 30 days after delivery

    • A complete solution for improving sound on DSLR, mirrorless, and camcorders
    • Includes a mixer, mics, output and input cables, and camera mount
    • Provides +48 volts of phantom power to professional XLR mics
    • Monitor audio during recording and playback with built-in headphone jack
    • Durable metal construction with shoe mount for microphones, lights or other equipment

    The built-in microphones on DSLR, mirrorless, cinema and video cameras sound terrible, but if you use the Saramonic CaMixerwith your camera, your audio will be elevated to broadcast quality. The CaMixer supplies you with two excellent-sounding condenser microphones, and you can also use the XLR microphone of your choice. A built-in headphone jack lets you listen to everything you shoot, and the entire package is compact and ultraportable.

    The lightweight CaMixer runs on a single 9-volt battery and comes with two low-profile condenser microphones that plug directly into it. These mics can swivel up and down and rotate to point at people and other sound sources. A mini-XLR input on the side makes it possible to connect professional microphones, and a switch applies +48 volts of phantom power for using shotgun condensers and other kinds of microphones.

    A large, stepped gain knob lets you easily dial-in perfect levels, and the backlit display lets you see your audio and battery meters. You can switch between recording and playback modes to listen to your videos through the CaMixer’s headphone jack. A shoe mount is provided at the top to attach microphones, lights or other equipment, and a tripod thread at the base enables you to mount to a camera.

    Included items:

    1 x CaMixer audio interface

    2 x Swiveling condenser microphones

    2 x Output cables (1 for cameras with headphone jacks, 1 for cameras without headphone jacks)

    1 x Metal shoe mount

    1 x Short mini-XLR to regular XLR cable

    1 x Printed manual

    1 x Warranty card 

    Specifications:

    Frequency Response: 20 Hz to 20 Khz, +/-0.5 dB

    Signal to Noise Ratio: 82 dB @ 1 kHz, -30 dBu input

    Distortion: Less than 0.03% @ 1 kHz, -30 dBu input

    Input 1 Gain: 15 dB

    Input 2 and Mini XLR Jack Gain: 15 dB

    Microphone Inputs 1 & 2 Power: +5V Microphone Power

    XLR Mini Input Power: +48V Phantom Power (On/Off)

    VU Meter: -18 dB to +3 dB in 3 dB increments

    Power Requirements: 9V alkaline or lithium battery

    Dimensions: 3.7 x 2.5 x 1.4" (95 x 35 x 65 mm)

    Weight: 5.5 oz (156g)

    Optional Accessories (Sold Separately):

    • XM1-WS Furry Windjammer for SmartMic and SR-XM-1
    • SR-LV600 Mini-XLR Omnidirectional Lavalier Microphone for SmartMixer & CaMixer (20' Cable)
    • SR-HM7 Cardioid Dynamic Handheld Interview Microphone
    • SR-TM1 Cardioid 11” Cardioid Shotgun Microphone
    • SR-TM7 Super-Cardioid 15” Cardioid Shotgun Microphone
    • SR-NV5 Cardioid 6.5” Shotgun Microphone
    • XLavMic-O Omnidirectional Lavalier with XLR Connector
    • XLavMic-C Cardioid Lavalier with XLR Connector
    • UwMic9 RX9+TX9+TX9 Dual UHF Wireless Lavalier Microphone
    • UwMic9 RX9+TX9 UHF Wireless Lavalier Mic System
    • UwMic9 RX9+HU9 UHF Wireless Handheld Microphone System
    • VmicLink5 RX+TX+TX+TX Three-Channel 5.8GHz Wireless Lavalier System
    • VmicLink5 HiFi RX5+TX5 5.8GHz Wireless Lavalier System
    • WM4C-C35 Replacement 3.5mm Male Stereo TRS to 3.5mm Male Stereo TRS Output Connector Cable
    • SR-CS350 2-Pack 3.5mm Male Stereo TRS to 3.5mm Male Stereo TRS Output Connector Cable
    • LC-C35 Output Cable: Locking 1/8” to Lightning cable for iPhone & iPad
    • UTC-C35 Output Cable: Locking 1/8” to USB Type-C cable for smartphone or tablets
    • SR-PMC2 Output Cable: 1/8” to TTRS cable for Smartphone or Tablets
    • SR-GMC2 Output Cable: 1/8” to select GoPro cameras
    • USB-C201 Output Cable: Locking 1/8” to USB cable PC or Mac computers
    • SR-UC-201 3.5mm Female TRS Microphone Adapter Cable to 3.5mm Male TRRS for smartphone or tablets
    • SR-25C35 3.5mm to 2.5mm Microphone Output Cable for SSE with Fuji Cameras
    • SR-XM1 Replacement Microphone for SmartMixer and CaMixer
      ">


      Recently Viewed Products

      The built-in microphones on DSLR, mirrorless, cinema and video cameras sound terrible, but if you use the Saramonic CaMixerwith your camera, your audio will be elevated to broadcast quality. The CaMixer supplies you with two excellent-sounding condenser microphones, and you can also use the XLR microphone of your choice. A built-in headphone jack lets you listen to everything you shoot, and the entire package is compact and ultraportable.

      The lightweight CaMixer runs on a single 9-volt battery and comes with two low-profile condenser microphones that plug directly into it. These mics can swivel up and down and rotate to point at people and other sound sources. A mini-XLR input on the side makes it possible to connect professional microphones, and a switch applies +48 volts of phantom power for using shotgun condensers and other kinds of microphones.

      A large, stepped gain knob lets you easily dial-in perfect levels, and the backlit display lets you see your audio and battery meters. You can switch between recording and playback modes to listen to your videos through the CaMixer’s headphone jack. A shoe mount is provided at the top to attach microphones, lights or other equipment, and a tripod thread at the base enables you to mount to a camera.

      Included items:

      1 x CaMixer audio interface

      2 x Swiveling condenser microphones

      2 x Output cables (1 for cameras with headphone jacks, 1 for cameras without headphone jacks)

      1 x Metal shoe mount

      1 x Short mini-XLR to regular XLR cable

      1 x Printed manual

      1 x Warranty card 

      Specifications:

      Frequency Response: 20 Hz to 20 Khz, +/-0.5 dB

      Signal to Noise Ratio: 82 dB @ 1 kHz, -30 dBu input

      Distortion: Less than 0.03% @ 1 kHz, -30 dBu input

      Input 1 Gain: 15 dB

      Input 2 and Mini XLR Jack Gain: 15 dB

      Microphone Inputs 1 & 2 Power: +5V Microphone Power

      XLR Mini Input Power: +48V Phantom Power (On/Off)

      VU Meter: -18 dB to +3 dB in 3 dB increments

      Power Requirements: 9V alkaline or lithium battery

      Dimensions: 3.7 x 2.5 x 1.4" (95 x 35 x 65 mm)

      Weight: 5.5 oz (156g)

      Optional Accessories (Sold Separately):

      Trustpilot